#5 HOW TO SAFELY BEACH A LIFE BOAT?

-

A recent grounding incident of a ship turned out to be fatal as the master declared “Abandon-Ship”. Though the decision to abandon the ship was, some say, dubious; it was nevertheless a-moment-of-panic and given the conditions the only chance to survive.

Subsequently, as the crew managed to get away from the wretched ship, the fate had its own plans; the lifeboat which was carrying the survivors capsized under steep breakers and heavy surfs, while they tried ‘beaching’ it. Except a few crew members who went missing in the bad weather conditions, others found themselves extremely lucky to be alive.

Beaching a life boat in good weather seems doable, although a bit tricky, but when it is to be done in a bad and inclement weather, it is a nightmare.


A boat can easily be toppled over its broad side when approaching dangerous breakers and surfs near the shore, if not handled skillfully and of course, with a lot of patience. That’s what exactly happened to the folks in the life boat who were trying to ‘beach’ it as they went crashing over the dodgy waves and the fateful happened.

To survive such a debacle, it’s important to be mentally strong and focused. It also depends upon the survivors’ ingenuity to deal with the hazards they face. In this case, the skills or rather the knowledge vital to handle the life boat while beaching were inapt. So to fill in the gaps, let’s discuss a few basic techniques among several advanced ones to safely beach a life boat once land is sighted.

Selecting your landing point

Once the landing point is selected, take your time to adjust to the situation. Landing onto the leeward side of the main land or island, or on a point projecting out into water is more favoured than crashing in from the windward side. Avoid the glare of the sun as far as possible to circumvent from getting baffled when finding the correct landing spot. Choosing a sandy beach for landing is definitely advised. Never beach in the night time.

Navigate carefully

Avoid getting caught into the rip currents or tides as they might carry you further into danger or far away from it. Look for openings in the surf lines and head in for them. A good lookout is important for corals or rocks protruding out from the shallows.

The Beaching Technique

Using the boat’s engine, close into a position that is comfortable for maneuvering, suitably a point where the swell breaks or a position from where the breakers rise.  Then turn the boat around to face the sea with the boat’s stern towards the shore. Now stream the sea anchor along with a tripping line attached to it. This will help in holding the bow into the sea and swell.  Now, after securing the rudder to any side use the boat oars to steer ashore.


The moment breakers hit the bow of the boat, the person handling the sea anchor should then trip the line and at the same time the boat should be oared astern. The person at the bow should watch the next wave and release the tripping line to have the life boat stemming the sea; oars should be taken out of water. This will take the boat astern slowly and safely while keeping the bow offshore. Once the boat hits a shallow ground, some of the survivors should then get out of the boat and pull it all the way in.

Avoid getting toppled over

With breakers flowing rapidly it won’t be possible to out-run them and run aground simply by using the life boat’s engines. Heaving onto the sea when heading inshore might lead the boat to lose its steerage way causing the boat to get broadside to the sea / swell and keel over. If in case the boat capsizes, remember to swim clear of the boat as soon as possible.

Although the self-righting, fully enclosed lifeboats are much safer to be in than their older cousins, chances are they may just turn out to be worse on a bad day. Panic, mostly, they say is the culprit to a human catastrophe. So be prepared ‘as knowledge in most of the cases is always better than imagination’.

Comments

Post a Comment

Popular posts from this blog

#18 10 Main Personal Protective Equipment (PPE) Used Onboard Ship

-
Image
  Safety of self and co-workers is the prime priority kept in mind by a professional seafarer while working onboard ship. All shipping companies ensure that their crew follow personal safety procedures and rules for all the operation carried onboard ships. To achieve utmost safety on board ship, the basic step is to make sure that everybody wears their personal protective equipments made for different types of jobs carried out on ship. Following are the basic personal protective equipments (ppe) that are always present onboard a ship to ensure safety of the working crew: Protective Clothing : Protective clothing is a coverall which protects the body of the crew member from hazardous substance like hot oil, water, welding spark etc. It is popularly known as “dangri “or “boiler suit”. Helmet : The most important part of the human body is the head. It needs utmost protection which is provided by a hard plastic helmet on the ship. A chin strap is also provided with the helmet which k...
Read more

#68 MANNED SHIPS ERA TO ARTIFICIAL INTELLIGENCE CONTROLLED SHIPS ERA (iota-4)

-
Image
 Differences between IT and OT systems Whereas IT systems manage data and support business functions, OT is the hardware and software that directly monitors/controls physical devices and processes and as such are an integral part of the ship and must function independently of the IT systems onboard. The systems can, however, be connected to the IT network for performance monitoring, remote support etc. Such systems are sometimes referred to as belonging to the Industrial Internet of Things (IIOT). There may be important differences between who handles the purchase and management of the OT systems versus IT systems on a ship. IT managers are not usually involved in the purchase of OT systems and may or may not have a thorough understanding of cyber security. The purchase of such systems should involve someone, who knows about the impact on the onboard systems but will most probably only have limited knowledge of software and cyber risk management. IT covers the...
Read more

#41 Maritime Cybersecurity

-
Image
Maritime is one of the oldest industries and lifeblood of the global economy, accounting for the carriage of 90% of world trade. Ships and other vessels may seem like unusual targets for cyberattacks. But with their growing use of industrial control systems (ICS) and satellite communications, hackers have a new playground that’s ripe for attack. In a 2020 Safety at Sea and BIMCO Maritime Cyber Security survey, despite the majority of respondents (77%) viewing cyber-attacks as a high or medium risk to their organizations, few appear to be prepared for the aftermath of such an attack, 64% of respondents said their organization has a business continuity plan in place to follow in the event of a cyber incident, but only 24% claimed it was tested every three months, and only 15% said that it was tested every six to 12 months. Only 42% of respondents said that their organization protects vessels from operational technology (OT) cyber threats, and some respondents went so far as to describe...
Read more