# 39 The Science Behind Marine Boiler Water Circulation On Ships

-

The most important aspect of any marine boiler is maintaining the correct water level. As the boiler fires, steam liberates from the surface of the water and thus as the steam gets consumed, there is subsequent drop in water level inside the boiler. Steam gets produced only when there is an effective circulation of water within the boiler. For tank type boilers, circulation is not distinct and the water circulates within the tank of the boiler itself. For water tube boilers, circulation is necessary within each and every tube and headers. This happens naturally if both the steam and water drums are connected with tubes. But there is some basic design reason which has to be emphasized on.

Natural Circulation within a Water Tube Boiler

The steam drum and water drum may or may not be separated depending upon the boiler design. To understand the boiler water circulation principle, we will assume the following components to be separate. A steam drum at the top is connected to the water drum at the bottom through down comers outside the boiler shell and risers inside the boiler shell. Cold water is fed to the top drum/steam drum, by water feed pump through a screw down non-return valve and a check valve. As we all know, hot water stays on top and relatively cold water (being denser) travels to the bottom of the drum. The steam/water drum has down comers connecting to the water ring at the bottom of the boiler. The down comers are located outside the boiler shell and are large in diameter when compared to the water tubes. As the cold water from the down comers reach the water ring in the bottom, the circulation starts within the tubes and drums. As the water particles enter the water tubes, which are inside the boiler furnace, they start to heat up and become wet steam with some bubbles. As they are less dense, they immediately rise up to the steam drum and thus are continuously being replaced by relatively cold water from down comers. Thus boiler water circulation happens naturally inside a water tube boiler.

Design Aspect

If the circulation has to happen in a natural way, then there are some design considerations to be observed. Ratio between the amount of steam leaving the risers & the amount of water entering the down comers is of the order 4:1. It is important to have more water than steam on the risers. If the riser at some point becomes completely full of steam, the tube would over heat and “BURN OUT”. “BURN OUT” is where the tube metal over heats can no longer resist the pressure forces within the tube and thus ruptures.

Reasons for having External Downcomers

It is known that as the pressure and temperature increases, the density of water decreases. Thus the density difference between water and the steam reduces & thus at higher pressures, the natural circulation of water-steam is impaired. Thus to maintain the natural circulation, external, unheated down comers are fitted. These external down comers are large bore tubes connecting the steam drum with the water drum.

Comments

Post a Comment

Popular posts from this blog

#18 10 Main Personal Protective Equipment (PPE) Used Onboard Ship

-
Image
  Safety of self and co-workers is the prime priority kept in mind by a professional seafarer while working onboard ship. All shipping companies ensure that their crew follow personal safety procedures and rules for all the operation carried onboard ships. To achieve utmost safety on board ship, the basic step is to make sure that everybody wears their personal protective equipments made for different types of jobs carried out on ship. Following are the basic personal protective equipments (ppe) that are always present onboard a ship to ensure safety of the working crew: Protective Clothing : Protective clothing is a coverall which protects the body of the crew member from hazardous substance like hot oil, water, welding spark etc. It is popularly known as “dangri “or “boiler suit”. Helmet : The most important part of the human body is the head. It needs utmost protection which is provided by a hard plastic helmet on the ship. A chin strap is also provided with the helmet which k...
Read more

#68 MANNED SHIPS ERA TO ARTIFICIAL INTELLIGENCE CONTROLLED SHIPS ERA (iota-4)

-
Image
 Differences between IT and OT systems Whereas IT systems manage data and support business functions, OT is the hardware and software that directly monitors/controls physical devices and processes and as such are an integral part of the ship and must function independently of the IT systems onboard. The systems can, however, be connected to the IT network for performance monitoring, remote support etc. Such systems are sometimes referred to as belonging to the Industrial Internet of Things (IIOT). There may be important differences between who handles the purchase and management of the OT systems versus IT systems on a ship. IT managers are not usually involved in the purchase of OT systems and may or may not have a thorough understanding of cyber security. The purchase of such systems should involve someone, who knows about the impact on the onboard systems but will most probably only have limited knowledge of software and cyber risk management. IT covers the...
Read more

#41 Maritime Cybersecurity

-
Image
Maritime is one of the oldest industries and lifeblood of the global economy, accounting for the carriage of 90% of world trade. Ships and other vessels may seem like unusual targets for cyberattacks. But with their growing use of industrial control systems (ICS) and satellite communications, hackers have a new playground that’s ripe for attack. In a 2020 Safety at Sea and BIMCO Maritime Cyber Security survey, despite the majority of respondents (77%) viewing cyber-attacks as a high or medium risk to their organizations, few appear to be prepared for the aftermath of such an attack, 64% of respondents said their organization has a business continuity plan in place to follow in the event of a cyber incident, but only 24% claimed it was tested every three months, and only 15% said that it was tested every six to 12 months. Only 42% of respondents said that their organization protects vessels from operational technology (OT) cyber threats, and some respondents went so far as to describe...
Read more